This commercial sink faucet is made by Moen 5923 Align Single-Handled Spring Pulldown Kitchen Faucet, one of the leading manufacturers of faucet kitchen and bathroom installations. This alignment model combines the strength and durability of a commercial faucet with a beautiful profile.
There are two different types of sprayers. The first is a standard air chain that is used for everyday use. The second spray is rinsed with Moin’s patented PowerClean system, which provides a less concentrated spray with less splicing and more than 50% cleaning power than other taps.
Product Overview: Moen 5923 Align Single-Handled Spring Pulldown Kitchen Faucet
This Moen 5923 Align Single-Handled Spring Pulldown Kitchen Faucet comes in four different functions. It offers a protective 1.5 gallon per minute flow rate that is in full compliance with all state and federal water conservation regulations.
Available in Black Chrome, Polished Chrome, Matte Black, and Stainless Steel with Spot Resistant Finish. The spray head is on the faucet and not the pull-down sprayer.
Moen Align 5923 kitchen faucet is a single-hole faucet, but Moen sells an optional slope that can be used to mount the faucet in a three-hole system. The height of the faucet is 22-1 / 2 inches wide and extends from the deck to the upper part of the spring arch.
The spot has an 8-3 / 4-inch clearance from the deck and a 10-inch reach from the center of the faucet body to the outlet.
When shopping for the best Moen 5923 Align Single-Handled Spring Pulldown Kitchen Faucet, being able to compare features is a great way to decide between two different models. We list features here so you can easily compare and contrast our various unbiased reviews, and get the high-quality kitchen faucet.
- There are four different finishes available
- Black Stainless Steel
- Polished Chrome
- Matte Black
- Spot Resistant Stainless Steel
- Flow Rate 1.5 GPM
- Ceramic disc valveD cartridge system
- Spout Clearance: 8.75 inches
- Spout Reach: 10 inches
- Hose Length: 68 inches
- Single-hole mount
- Escutcheon available separately for three-hole installation
- Lifetime Limited Warranty
Application: one hole
- Connection Type: compression
- Number Of Functions: two-function
- Connection Size: 3/8″
- Power Boost Technology
- Available with TouchlessTechnology
- Easy to Install
- Moen 5923 comes with a plastic sprayer head
There are 4 Things to Know Before You Install Your New Faucet:
Once you have purchased your new kitchen faucet, you must decide. You can either install your faucet professionally, or you can install it yourself. While manufacturers will always recommend a professional installation.
There’s no reason why you can’t do it yourself with a little preparation and some DIY know-how. But before you get started, here are three key things to make sure you know.
- Read the Manual
- Get the Right Tools
- Find the Water Cutoff
- Remove Your Aerator
- Read the Manual :
Before sitting in front of your sink, read the manual and make sure you know where to go. Although it sounds easy; You just connect the water lines and screw the faucet into it. The modern faucet has more than that.
Make sure you know where every part of your kit goes, and you know what the water line is connected to. One of the most frustrating things is connecting everything, and then hot water comes out when you want cold.
- Get the Right Tools:
Installing a new kitchen faucet will probably require more than a pair of tongs and a screwdriver set. One of the most common tools you will probably not have in your toolbox is a basin wrench.
This wrench is basically a long thin wrench that allows you to access nuts in tight spaces between the sink and the wall. You may not need one if you have enough clearance or have something in your kitchen faucet catch.
- Find the Water Cutoff :
At first, you will need to turn off the water before installing your new faucet. But go beyond knowing where the valves are under your sink. Find an early source of water for your home as well.
You may need to replace the valves, especially if your home is old and has 1/2 inch water lines installed.
- Remove Your Aerator:
After completing your installation and turning on the water for the first time, remove the aerator from your tap. This is because the throbbing around often ends up building up your supply lines.
As soon as you turn on the water, those pieces of minerals and debris will disappear. Removing the aerator avoids suspension and damage. Let the beginning water run for a few minutes and then turn it off and reinstall the aerator.
The Moen 5923 Align Single-Handled Spring Pulldown Kitchen Faucet provides a value of quality for your home. The patented spot-resistant finish means your fingerprints will be resistant to water stains and hard water scales. Spot opening is a neat cleaning system that cleans with a damp cloth. You will get this feature in Moen Align 5923.
If you are not sure which tap is best for you, take a look at our unbiased reviews and shopping guides. Thank you!